Working time on Lumisenses LED Flex Device is 10 000 hours (LED).
Instructions:
Plug the LED Flex Device to power supply.
Attach the Lumisenses LED Flex Device firmly on your working surface with the clamp. Place the light 10 cm from the eye.
Press the pedal and hold it down to cure the glue. NB! Make sure the LED light is directed on the glue and eyelash bond. Hold the pedal 1-2 seconds, which is enough time for the LED Glue to cure. Attention: Do not hold the pedal down longer than 2 seconds!
The device has been tested and measured in accordance with EVS-EN 62471 : 2008 and ISO 21348 standards. The measurement results regarding the potential radiation hazard are significantly lower than the limit values specified in the standards.
Standards:
Standard EVS-EN 62471 : 2008 – Photobiological safety of lamps and lighting equipment
ISO 21348 Space environment (natural and artificial) – Process the determining solar irradiances.
